MJF vs SLS: 3D Printing Technologies Compared
Selective Laser Sintering (SLS) and Multi Jet Fusion (MJF) are the two most ubiquitous 3D printing technologies for polymers and elastomers. While they...
Read moreHP Multi Jet Fusion (MJF) Service
- HP Multi Jet Fusion 3D Printing Services Online
- PA 12, PA 11, HP TPU
- Express 3D Printing within 3 Days
Upload your CAD files for an instant quote.
MJF 3D Printing Services
HP Multi Jet Fusion （MJF) is a powerful 3D printing technology that produces highly accurate and durable parts at fast speeds, especially compared to other powder bed fusion technologies. Multi Jet Fusion parts are great for end-use, low-to-mid volume production, for rapid prototyping, or as a bridge process to injection molding.
MJF printed parts can be post-processed by dyeing, sanding and plating.
Try Xometry Out Now In Just A Few Steps
Upload your files
1
Upload your files
Multiple designs for different parts can be imported at the same time to produce a single quote. In less than a minute, a detailed cost estimation appears on the screen.
Choose the process
2
Choose the process
First, select the manufacturing process you require. You can then choose from over 130 materials, including metals and plastics, and from a wide range of finishes and certifications.
Order your parts online
3
Order your parts online
Once you have selected the required options, all you need to do is confirm the order and pay for it on the secure payment platform. Your design will be analysed by Xometry engineers.
Receive your parts
4
Receive your parts
Within a short amount of time, you will receive the parts you ordered directly to your shipping address. You can track your package at any time in your personal account.
Advantages of MJF with Xometry
Massive Capacity
We can quickly produce both prototypes and large batches thanks to the largest manufacturing network, with over 10,000 vetted partners
Fast Production
You will get your 3D printed parts fast delivered in as fast as 3-5 days.
Quality Assurance
We have strong QA procedures, controlled by an in-house team of QA engineers, which allows us to deliver high quality parts.
Engineering Check & Status Updates
All designs are checked by engineers before they’re sent for 3D printing. After confirming your order, you will receive status updates on your production.
MJF 3D Printing Materials
Polymers
- Nylon PA 12
- Nylon PA 12 GB
- HP TPU
Finishing Options for MJF 3D Printing
Pros & Cons of MJF 3D Printing
| Advantages | Considerations |
| Free form design: doesn’t need support features | Limited material and colour choice |
| Versatile, durable, flexible and chemical resistant material (Nylon) | Surface roughness (however, could be reduced by media tumbling) |
| Scalable into series | Warping issues for large feature |
| Fast: Xometry can deliver them in just 3 days | |
| Cheap, especially for small series |
MJF Manufacturing Specifications & Capabilities
|
SLA |
MJF | SLS | FDM | SLM | |
| Lead time | 3 Days | 3 Days | 3 Days | 3 Days | 5 Days |
| Build volume | up to 736 x 635 x 533 mm | up to 380 x 284 x 380 mm；, while we normally recommend the maximum size of 356 x 280 x 356 mm | up to 340 x 340 x 605 mm；hile we normally recommend the maximum size of 320 x 320 x 580 mm | up to 914 x 610 x 914 mm | up to 119 x 189 x 300 mm；Recommended size: within 100 x 100 x 150 mm |
| Layer thickness | min 0.02mm | ~ 0.08 mm | ~ 0.1 mm，and for water-tight parts 1.5 mm, when wall thickness is higher | ~ 0.05–0.3 mm | ~ 0.1 mm |
| Minimum feature size | 0.4 mm | 0.5 mm，Recommended size 0.7 mm | 0.5 mm，Recommended size 0.75 mm | up to 0.2 mm | 1.0 mm |
| Tolerance | ±0.2%（± 0.2 mm） | ±0.3%（± 0.2 mm） | ±0.3% (± 0.3 mm) | ±0.3%（± 0.3 mm） | ±0.1% (±0.1 mm). However, tolerances are not guaranteed on the first attempt at a new design |
| 描述说明 | A technology that produces extremely accurate and high-resolution parts | One of the most popular and inexpensive technologies for industrial 3D printing | A technology that produces highly accurate and durable parts at fast speeds, especially compared to other powder bed fusion technologies | Widely known for a great material selection, accuracy, and possibility to print large parts | Metal 3D printing technology. Selectively fuses a fine metal powder in aluminium or stainless steel |
| Read more about SLA | Read more about MJF | Read more about SLS | Read more about FDM | Read more about SLM |
MJF 3D Printing Resources
Multi Jet Fusion (MJF) 3D Printing: Technology Overview
HP Multi Jet Fusion (MJF) is the one of the most commonly used 3D printing technologies for printing parts that are highly accurate and durable. Compared...
Read more10 Strongest Materials For 3D Printing
3D printing is a highly versatile manufacturing process that is capable of producing both prototypes and durable end-use parts. Certain applications require...
Read moreOrder 3D Printed Parts Online
Customers
40,000+
Parts Quoted
1 Million+
Get an Instant Quote
All uploads are secure and confidential.