Fused Deposition Modeling (FDM) Service

Fused Deposition Modeling 3D Printing Services Online
Over 20 Different Materials
Express 3D Printing within 3 Days

Upload your CAD files for an instant quote.

Get an Instant Quote

FDM 3D Printing Services

Fused Deposition Modeling (FDM) is a 3D printing technology widely known for its great material selection, accuracy, possibility to print large parts, and competitive cost. FDM parts are great for end-use, low-volume production, for rapid prototyping. FDM 3D prints usually do not require any post-processing.

Try Xometry Out Now In Just A Few Steps

Upload your files

Multiple designs for different parts can be imported at the same time to produce a single quote. In less than a minute, a detailed cost estimation appears on the screen.

Choose the process

First, select the manufacturing process you require. You can then choose from over 130 materials, including metals and plastics, and from a wide range of finishes and certifications.

Order your parts online

Once you have selected the required options, all you need to do is confirm the order and pay for it on the secure payment platform. Your design will be analysed by Xometry engineers.

Receive your parts

Within a short amount of time, you will receive the parts you ordered directly to your shipping address. You can track your package at any time in your personal account.

Advantages of FDM with Xometry

Massive Capacity

We can quickly produce both prototypes and large batches thanks to the largest manufacturing network, with over 10,000 vetted partners

Fast Production

You will get your 3D printed parts fast delivered in as fast as 3-5 days.

Quality Assurance

We have strong QA procedures, controlled by an in-house team of QA engineers, which allows us to deliver high quality parts.

Engineering Check & Status Updates

All designs are checked by engineers before they’re sent for 3D printing. After confirming your order, you will receive status updates on your production.

FDM 3D Printing Materials

Polymers

ABS
ASA
PA12 CF
PC
PLA
PETG
PEEK
ULTEM 1010
PEKK
PPSU
PPS
PC-ABS
PC-PBT
PC-FR
PA6/66
PA6-CF
HPPA-CF
HPPA-GF
ABS-GF
PET-GF
PET-CF
Victrex AM™ 200FIL
WANHUA PA12
BASF ULTRAFUSE® PPSU
BASF ULTRAFUSE® PC/ABS-FR
Kimya ABS-ESD

Finishing Options for FDM 3D Printing

As-printed (FDM)

FDM parts are built with support material that is removed during post-processing.

Notes:

The part surfaces are left with fine layer lines.
Custom

If a you select a custom finish in the Instant Quoting Engine it will require manual review. Manual quoting usually 1-2 business days.

Notes:

Submitting for manual review with a custom request does not guarantee a quote.

Pros & Cons of FDM 3D Printing

Advantages	Considerations
Large platform: you can print very large parts using this technology	Needs support elements, which can leave undesired marks after removing them
A very wide selection of materials and colours: over 40	Sweats small details
Usually do not require any post-processing	Significant layer stepping
Fast: Xometry can deliver them in just 3 days	Limited scalability
Cheap: for non-complex geometries this option might be around 15% cheaper than SLS

FDM Manufacturing Specifications & Capabilities

	SLA	MJF	SLS	FDM	SLM
Lead time	3 Days	3 Days	3 Days	3 Days	5 Days
Build volume	up to 736 x 635 x 533 mm	up to 380 x 284 x 380 mm；, while we normally recommend the maximum size of 356 x 280 x 356 mm	up to 340 x 340 x 605 mm；hile we normally recommend the maximum size of 320 x 320 x 580 mm	up to 914 x 610 x 914 mm	up to 119 x 189 x 300 mm；Recommended size: within 100 x 100 x 150 mm
Layer thickness	min 0.02mm	~ 0.08 mm	~ 0.1 mm，and for water-tight parts 1.5 mm, when wall thickness is higher	~ 0.05–0.3 mm	~ 0.1 mm
Minimum feature size	0.1 mm	0.5 mm，Recommended size 0.7 mm	0.5 mm，Recommended size 0.75 mm	up to 0.2 mm	1.0 mm
Tolerance	±0.2%（± 0.2 mm）	±0.3%（± 0.2 mm）	±0.3% (± 0.3 mm)	±0.3%（± 0.3 mm）	±0.1% (±0.1 mm). However, tolerances are not guaranteed on the first attempt at a new design
描述说明	A technology that produces extremely accurate and high-resolution parts	One of the most popular and inexpensive technologies for industrial 3D printing	A technology that produces highly accurate and durable parts at fast speeds, especially compared to other powder bed fusion technologies	Widely known for a great material selection, accuracy, and possibility to print large parts	Metal 3D printing technology. Selectively fuses a fine metal powder in aluminium or stainless steel
	Read more about SLA	Read more about MJF	Read more about SLS	Read more about FDM	Read more about SLM

Gallery of FDM 3D Prints

FDM 3D Printing Resources

10 Challenging DIY Open-Source Projects that Use 3D Printing

Apart from being one of the booming manufacturing methods in recent times and its increasing industrial usage, 3D printing also seeps into the workflow...

10 Strongest Materials For 3D Printing

3D printing is a highly versatile manufacturing process that is capable of producing both prototypes and durable end-use parts. Certain applications require...

Order 3D Printed Parts Online

Customers

40,000+

Parts Quoted

1 Million+